DIY Beetlejuice Tree Ornaments

Get ready to summon the ghost with the most to your Halloween festivities! In this DIY guide, we’ll show you how to create charming Beetlejuice-themed tree ornaments with his favorite sayings.

DIY Beetlejuice tree ornaments

If decorating a Beetlejuice tree is on your party list, then you’ve come to the right place.

These DIY Beetlejuice ornaments are super simple way to add his iconic sayings to your tree.


This post may contain affiliate links. We make a small commission if you buy the products from these links (at no extra cost to you). As an Amazon Associate, I earn from qualifying purchases. But we only recommend products we would use ourselves. For more information, click here to see our disclosures

Here is what you need to make this project.


  • Beetlejuice ornament printables (available in our Resource Library)
  • Glue – I like to use a glue stick since it’s less messy than regular glue. But any white glue will work.
  • 3-inch flat round pieces of wood*
  • Ribbon, string or ornament hooks for hanging


  • Scissors
  • A sharp object for poking holes, like an awl or a large needle

How to make a DIY Beetlejuice tree ornament

Here are the step-by-step instructions for making these easy ornaments.

1 | Print out the Beetlejuice ornament printables

Start by printing out the Beetlejuice ornament printables available for free in our subscriber’s Resource Library. You can find them in the Beetlejuice Party section.

If you’re not a member, all you have to do is sign up for our newsletter and we’ll send you the password.

2 | Cut out the ornament circles

Now, grab a pair of scissors and carefully cut out the ornament circles from the printables.

Try to cut as close to the edges as possible for a clean look.

3 | Glue the ornament printables onto the wood pieces

Next, apply glue evenly over one side of one of the pieces of wood.

I like to use a glue gun for this since it’s less messy than regular glue. But any white glue will work.

Position one of the cut-out circles so that the top of it is over the hole in the top of the wood.

Gently press the paper onto the glued surface.

Smooth out any bubbles and make sure the edges are glued down well.

4 | Poke a hole through the top

Using an awl, needle, or another sharp object, carefully poke a hole through the paper where the hole is in the wooden piece.

This is where you’ll thread the ribbon or string to hang your ornament.

5 | Repeat on the back side

Now, flip the wooden piece over and repeat steps 3 and 4 on the backside with another copy of the same ornament print.

This will make your ornament look great from both sides.

Be sure to align the printables correctly so that the pattern is facing up towards the hole in the wood.

6 | Thread and hang

Cut a piece of ribbon or string that is about 6 inches long.

Thread it through the hole, and tie a knot at the end.

You can also ornament hooks if you prefer.

Your Beetlejuice ornament is now ready to be hung on your Halloween tree or wherever else you want to display it.

The finished Beetlejuice ornaments

DIY Beetlejuice ornaments hung on a black Halloween tree

And voila!

You have created a spooktacular Beetlejuice Halloween tree ornament that will add that extra spooky touch to your Halloween décor.

Other Beetlejuice decorations you might like

Or read all about our Beetlejuice themed Halloween party.

Have comments or questions about our DIY Beetlejuice tree ornaments? Tell us in the section below.

This post was originally published on July 2, 2023 but was updated with new content on November 1, 2023.

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.